S.T.S. Inch Dumbbell Handle

• Steel To Stone Dumbbell Handle
• One pair of hardware anchors

• 2.375" diameter handle (same as the Thomas Inch Dumbbell Replica)
• 4" of grip between the welds
• 4-1/2" of grip space between the inside faces of the flanges, including the welds
• Steel construction
• Textured black finish (helps chalk adhere to the handle)
• Weight of handle with anchors: 3 lbs

The Steel To Stone Dumbbell Handle is one handle you can use with multiple pairs of Atlas Stones.

Putting the handle into your mold:
Your handle arrives fully assembled, with an anchor attached to each end. Fill your Atlas Stone mold with concrete, then set the handle on top so one anchor sits in the concrete. The handle acts as a guide, holding the anchor in the correct position while the concrete sets. Once the stone cures, unbolt the handle using the included tools. The anchor stays in the stone, and the second anchor is still attached to the other end of the handle, ready for your next stone.

Moving your handle between stones:
Each pair of stones has its own pair of anchors, so the handle can be unbolted from one pair and bolted to another. Instead of buying a separate handle for every pair of stones, add a Steel To Stone Hardware Anchor Pair for each additional pair you want to make. This lets you build a progression of stone sizes and weights, increasing or decreasing the difficulty of your training with the same handle.

The Steel To Stone Dumbbell Handle is not intended for overhead lifting. It is designed specifically as a deadlift grip challenge.

Drop the stone-loaded handle onto several layers of thick rubber flooring or rubber pads. Do not drop it directly onto concrete or other hard surfaces.

Concrete stones can crack or become damaged from repeated drops and impacts. Inspect the stones and anchors regularly to ensure they are tight, and discontinue use if you see cracking, damage, or other signs of failure.